07 Mar,2024
Tip：Maintenance tips for laser cutting machine tools
Clean the dirt at the air outlet regularly to ensure the effective exhaust effect.
Regularly maintain the filter device in the air supply and remove the water and dirt in the filter device immediately.
Regularly check whether the screws of the limit switch support frame and the impact block support frame are loose.
The dust on the exhaust fan filter of the electrical cabinet should be removed regularly to ensure good ventilation to facilitate heat dissipation from internal electrical components.
After the machine tool is installed, use it for a period of time to check the level of the machine tool and make corresponding adjustments to ensure laser cutting accuracy. Every week, be sure to check the grease filling status of the X-axis slide rail and ball screw, Y-axis slide rail and ball screw, Z-axis slide rail and ball screw, maintain the lubrication of each moving component, and increase the X, Y, The service life of Z-axis slide rail and ball screw.
Depending on the environmental conditions of the workshop, check the contamination status of the mirror and condenser surfaces regularly (at least once a month), and replace damaged optical glass to ensure its service life.
Relevant News
